5% OFF NEC DEALER COST on nearly every item, every day, all day.
Low Price Promise: Our prices drop 90 days after your purchase? We refund the difference!
NEC 1091006 NEC DSX T1 / PRI Digital Trunk Card
Product Description
Installing a T1 or PRI card with direct inward dial (DID) and automatic number identification (ANI) is not a do-it-yourself project! This requires a professional installer, with experience, to set up a T1 or PRI card correctly.
The NEC 1091006 T1/E1/PRI Line Card provides T1 advanced digital calling and gives the DSX-80/160 a maximum of 24 trunks in a single card slot.
The available T1 line types include:
• Loop Start (DTMF and Dial Pulse)
• Ground Start (DTMF and Dial Pulse)
• Direct Inward Dialing (DID) Wink Start (DTMF and Dial Pulse)
• Direct Inward Dialing (DID) Immediate Start (DTMF and Dial Pulse)
• E&M Tie Line Wink Start (DTMF and Dial Pulse)
• E&M Tie Line Immediate Start (DTMF and Dial Pulse)
Tips to remember:
• Normally you connect the T1/E1/PRI Card to a separately-purchased Channel Service Unit (CSU).
Use a standard straight-through CAT 5 cable to connect the T1/E1/PRI Card to the CSU. The CSU in turn connects to the telco smart jack.
• The T1/E1/PRI Card also provides 32E1 support. E1 is not used in North America.
• PRI will be available with a future firmware release.
• You can install a T1/E1/PRI Card in any slot except slot 1.
The NEC 1091006 T1/E1/PRI Line Card provides T1 advanced digital calling and gives the DSX-80/160 a maximum of 24 trunks in a single card slot.
The available T1 line types include:
• Loop Start (DTMF and Dial Pulse)
• Ground Start (DTMF and Dial Pulse)
• Direct Inward Dialing (DID) Wink Start (DTMF and Dial Pulse)
• Direct Inward Dialing (DID) Immediate Start (DTMF and Dial Pulse)
• E&M Tie Line Wink Start (DTMF and Dial Pulse)
• E&M Tie Line Immediate Start (DTMF and Dial Pulse)
Tips to remember:
• Normally you connect the T1/E1/PRI Card to a separately-purchased Channel Service Unit (CSU).
Use a standard straight-through CAT 5 cable to connect the T1/E1/PRI Card to the CSU. The CSU in turn connects to the telco smart jack.
• The T1/E1/PRI Card also provides 32E1 support. E1 is not used in North America.
• PRI will be available with a future firmware release.
• You can install a T1/E1/PRI Card in any slot except slot 1.